HIGH MODULUS WEAVES - HIGH ASPECT
New complete high aspect line: 7 weights

(Click on highlighted fabric numbers for specification sheets)

Also see: High Modulus Dacron - Low Aspect

Width Fabric
Specification
(PDF)		 Warp x Fill
Denier		 Fabric Properties
36", 91.4cm 5.93 150 x 350

  • 1W70 and Dacron 52 in load bearing fill. Warps include 1W70, Dacron, Acordis 57T, Kosa.

  • 5.93: for mains / genoas with 3 / 1 or less aspect.

  • New very fine weave 6.63 is applicable for mainsails and genoas with 3 / 1 or less.

  • 7.3 is suitable for mains and genoas with 2.5 / 1 aspect ratios or less.

  • 8.3 is suitable for mains and genoas with 3 / 1 aspect ratio or more. New higher count.

  • 9.3 is suitable for mains with 3 / 1 aspect ratio or more, and high aspect ratio genoas.

  • 10.3 is for mains with 3 / 1 aspect ratio or more, and high aspect genoas.

  • 13.93 is for mains with 3 / 1 aspect ratio or more, and high aspect ratio genoas.
54", 137cm 150 x 350
36", 91.4cm 6.63 150 x 500
54", 137cm 150 x 500
54", 137cm 7.3 250 x 500
54", 137cm 8.3 250 x 840
54", 137cm 9.3 250 x 1000
54", 137cm 10.3 370 x 1300
54", 137cm 13.93 500 x 1800